eceee  

Panel 4. Undertaking high impact actions: The role of technology and systems optimisation

Panel leaders: Clemens Rohde & Louise Trygg

Introduction to Panel 4

Energy efficiency improvements in the U.S. petroleum refining industry (4-062-14)
This is a peer-reviewed paper.
William Morrow, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory, USA
John Marano, JM Energy Consulting Inc., USA
Jayant Sathaye, Lawrence Berkeley National Laboratory, USA
Ali Hasanbeigi, Lawrence Berkeley National Laboratory, USA
Eric Masanet, Northwestern University, USA
Tengfang Xu, Lawrence Berkeley National Laboratory, USA

Green cooling towers (4-003-14)
This paper was not peer-reviewed.
Binoy Mishra, Green Cooling Tower Solutions, USA

Innovative system for electricity generation from waste heat recovery (4-006-14)
This is a peer-reviewed paper.
Daniele Forni, FIRE – Italian Federation for Rational Use of Energy, Italy
Francesco Campana, Turboden s.r.l., Italy
Dario Di Santo, FIRE – Italian Federation for Rational Use of Energy, Italy

A system perspective on industrial energy efficiency (4-009-14)
This is a peer-reviewed paper.
Louise Trygg, University of Linköping, Sweden
Björn G Karlsson, University of Linköping, Sweden

An insight into the ecodesign process – the example of steam boilers (4-034-14)
This is a peer-reviewed paper.
Clemens Rohde, Fraunhofer Institute for Systems and Innovation Research, Germany
Berit Ostrander, Fraunhofer ISI, Germany
Simon Hirzel, Fraunhofer ISI, Germany
Ali Aydemir, Fraunhofer ISI, Germany

Bridging barriers for multi-party investments in energy efficiency – a real options based approach for common utility systems design and evaluation (4-017-14)
This is a peer-reviewed paper.
Johanna Mossberg, SP Technical Research Institute of Sweden, Sweden
Roman Hackl, Chalmers University of Technology, Sweden
Simon Harvey, Chalmers University of Technology, Sweden
Christian Jensen, University of Gothenburg, School of Business, Economics and Law, Sweden
Anders Sandoff, University of Gothenburg, School of Business, Economics and Law, Sweden
Gabriela Schaad, University of Gothenburg, School of Business, Economics and Law, Sweden
Andreas Furberg, University of Gothenburg, School of Business, Economics and Law, Sweden
Mattias Haggärde, University of Gothenburg, School of Business, Economics and Law, Sweden

A method for bottom-up energy end-use data collection – results and experience (4-028-14)
This paper was not peer-reviewed.
Per Sommarin, Swerea SWECAST, Sweden
Anders Svensson, Sverea SWECAST AB, Sweden
Patrik Thollander, Linköping University, Sweden

The suitability of different types of industries for inter-site heat integration (4-027-14)
This is a peer-reviewed paper.
Thomas Hills, Grantham Institute for Climate Change, Imperial College London, United Kingdom
Ajay Gambhir, Grantham Institute for Climate Change, Imperial College London, United Kingdom
Paul Fennell, Chemical Engineering Department, Imperial College London, United Kingdom

Analytics for energy efficiency concepts and applications (4-033-14)
This paper was not peer-reviewed.
Véronique Boutin, Schneider Electric, France
Rodolphe Héliot, Schneider Electric, France

Industry – more than just processes: a combined stock-model approach to quantify the energy saving potential for space heating in European industry (4-041-14)
This is a peer-reviewed paper.
David Biere, Fraunhofer Institut für System- und Innovationsforschung ISI, Germany
Tobias Fleiter, Fraunhofer Institut für System- und Innovationsforschung ISI, Germany
Simon Hirzel, Fraunhofer Institut für System- und Innovationsforschung ISI, Germany
Benjamin Sontag, TEP Energy GmbH Technology Economics Policy – Research and Advice, Switzerland

Electric or pneumatic? Comparing electric and pneumatic linear drives with regard to energy efficiency and costs (4-060-14)
This is a peer-reviewed paper.
Simon Hirzel, Fraunhofer Institute for Systems and Innovation Research, Germany
Tim Hettesheimer, Fraunhofer Institute for Systems and Innovation Research ISI, Germany
Marcus Schroeter, Bochum University of Applied Sciences, Germany

Conceptualizing good practices: adding efficiency by using intelligent systems and processes (4-068-14)
This is a peer-reviewed paper.
Ville Rantanen, Aalto University, Finland

Re-industrialisation and low carbon economy – can they go together? Results from transdisciplinary scenarios for energy intensive industries (4-082-14)
This is a peer-reviewed paper.
Clemens Schneider, Wuppertal Institute for Climate, Environment & Energy, Germany
Stefan Lechtenböhmer, Wuppertal Institute for Climate, Environment & Energy, Germany
Samuel Höller, Wuppertal Institute for Climate, Environment & Energy, Germany

Energy efficient technologies in the German steel industry – low hanging fruits? (4-081-14)
This is a peer-reviewed paper.
Marlene Arens, Fraunhofer Institute for Systems and Innovation Research, Germany
Ernst Worrell, Utrecht University, The Netherlands

LCC research program findings for realising energy efficient fan, compressor and conveyor systems with a frequency converter (4-083-14)
This is a peer-reviewed paper.
Tero Ahonen, Lappeenranta University of Technology, Finland
Jukka Tolvanen, ABB Drives, Finland
Jussi Tamminen, Lappeenranta University of Technology, Finland
Jero Ahola, Lappeenranta University of Technology, Finland

Assessment of the economic viability of the integration of industrial waste heat into existing district heating grids (4-086-14)
This is a peer-reviewed paper.
Marcus Hummel, Energy Economics Group (EEG), Vienna University of Technology, Austria
Carmen Villotti, Energy Economics Group, Vienna University of Technology, Austria
Lukas Kranzl, Energy Economics Group, Vienna University of Technology, Austria

Energy efficiency in industrial surplus heat (4-087-14)
This paper was not peer-reviewed.
Lauri Suomalainen, Motiva Oy, Finland
Hille Hyytiä, Motiva Oy, Finland

Energy management in municipal solid waste treatment: a case study of a mechanical biological treatment facility (4-093-14)
This is a peer-reviewed paper.
Hermano Bernardo, Institute for Systems Engineering and Computers at Coimbra, Portugal
Filipe Oliveira, Polytechnic Institute of Leiria and Institute for Systems Engineering and Computers at Coimbra, Portugal
Edgar Quintal, Institute for Systems Engineering and Computers at Coimbra, Portugal

Flexible industrial processes: a valuable tool to accommodate big scale variable renewables. Assessment of additional wind power integration by industrial demand side management (4-109-14)
This paper was not peer-reviewed.
Hans De Keulenaer, European Copper Institute, Belgium
Fernando Nuno, Copper Alliance, Spain
Joachim Käufler, Synlift Systems GmbH, Germany
Robert Pohl, Synlift Systems GmbH, Germany
Simone Deiringer, Synlift Systems GmbH, Germany

Research on the optimization of heat processing parameters in die-casting mould manufacturing with high-speed steel W18Cr4V (4-110-14)
This paper was not peer-reviewed.
Minghao Ji, Logistics Engineering College, Shanghai Maritime University, China

Panels of the eceee 2014 Industrial Summer Study:

Panel 1. Programmes to promote industrial energy efficiency

Panel 2. Sustainable production design and supply chain initiatives

Panel 3. Matching policies and drivers: Policies and directives to drive industrial efficiency

Panel 4. Undertaking high impact actions: The role of technology and systems optimisation

Panel 5. The role of energy management systems, education, outreach and training

Panel 6. Business models to improve industrial efficiency, global perspective

eceee 2014 Industrial Summer Study start page

Industrial Efficiency 2016 partners