eceee  

Panel 2. Sustainable production design and supply chain initiatives

Panel leaders: Andrea Trianni & Enrico Cagno

Introduction to Panel 2

Biogas in the Nordic forest industry: current state and future business potential (2-007-16)
Peer-reviewed paper
Mikael Ottosson, Department of Management and Engineering, Linköping University, Sweden
Hans Andersson, Dep. of Management and Engineering (IEI) Business Administration, Linköping university, Sweden
Thomas Magnusson, Dep. of Management and Engineering (IEI) Business Administration, Linköping

Innovation to bring energy and resource efficiency on the industry main agenda (2-095-16)
This is a non-peer reviewed extended abstract. No paper available.
Hélène Riviere-Kaluc, ADEME, France
Frédéric Streiff, ADEME, France

Development of a methodology for the design and implementation of solar process heat systems in the food industry (2-014-16)
Peer-reviewed paper
Holger Mueller, De Montfort University, Germany
Rick Greenough, De Montfort University, United Kingdom

How well can the potential of industrial excess heat be estimated? (2-017-16)
Peer-reviewed paper
Erwin Cornelis, Vito NV, Belgium
Johan Van Bael, VITO NV, Belgium

Analysis of the decision making process of energy efficient investments in the process industry (2-027-16)
This is a non-peer reviewed extended abstract. No paper available.
Suzanne Brunsting, ECN, The Netherlands
Mariëlle Rietkerk, ECN, Policy Studies, The Netherlands
Bart Vos, Tilburg University, The Netherlands

Investing in energy efficiency – new insights from Swedish pulp and paper industry (2-028-16)
This is a non-peer reviewed extended abstract. No paper available.
Josefine Rasmussen, Linköping University, Department of Management and Engineering, Sweden

Modeling the cement industry in integrated assessment models: key factors for further improvement (2-033-16)
Peer-reviewed paper
Katerina Kermeli, Utrecht University, The Netherlands
Ernst Worrell, Utrecht University, The Netherlands
Wina Crijns-Graus, Utrecht University, The Netherlands

A methodology for verified energy savings in manufacturing facilities through changes in operational behaviour (2-034-16)
Peer-reviewed paper
John Cosgrove, Limerick Institute of Technology, Ireland
Frank Doyle, Limerick Institute of Technology, Ireland
Mike O'Neill, Takumi Precision Engineering Ltd, Ireland
John Littlewood, Cardiff Metropolitan University, United Kingdom
Paul Wilgeroth, Cardiff Metropolitan University, United Kingdom

ProCold: a project that boosts supply and demand for the most energy efficient commercial plug-in refrigerators and freezers (2-059-16)
This is a non-peer reviewed extended abstract. No paper available.
Christof Horvath, Austrian Energy Agency, Austria
Sophie Attali, Guide Topten, France
Eva Geilinger, Bush Energie GmbH, Switzerland

Barriers to energy efficiency measures and the role of industrial sustainability (2-046-16)
Peer-reviewed paper
Alessandra Neri, Politecnico di Milano, Italy
Enrico Cagno, Politecnico di Milano, Italy
Andrea Trianni, Politecnico di Milano, Italy

GeniAl – a network for the Swedish aluminium industry (2-049-16)
This is a non-peer reviewed extended abstract. No paper available.
Hans Frisk, Svenskt Aluminium, Sweden
Gerard Tuenter, Swedish Energy Agency Energy Efficiency Department, Sweden
Mats Söderström, University of Linköping IEI Energisystem, Sweden

Industrial areas and consortia in the Veneto and Basilicata regions: a partnership for innovation (2-058-16)
This is a non-peer reviewed extended abstract. No paper available.
Simona Loperte, Insitute of Methodologies for Environmental Analysis – National Research Council, Italy
Carmelina Cosmi, Institute of Methodologies for Environmental Analysis CNR-IMAA, Italy
Alessandra Pellizzaro, Veneto Innovazione Spa Enterprise Europe Network-North East Italy, Italy

Energy savings of inter-company heat integration: Tapping potentials with spatial analysis (2-072-16)
Peer-reviewed paper
Ali Aydemir, Fraunhofer Institute for Systems and Innovation Research, Germany
Clemens Rohde, Fraunhofer Institute for Systems and Innovation Research ISI, Germany
Dorothea Ko, Fraunhofer Institute for Systems and Innovation Research ISI, Germany

Benchmarking energy efficiency in the German non-energy intensive industries (2-080-16)
Peer-reviewed paper
Katharina Mattes, Fraunhofer Institute for Systems and Innovation Research, Germany
Simon Hirzel, Fraunhofer Institute of Systems and Innovation Research
Angela Jäger, Fraunhofer Institute of Systems and Innovation Research
Lisa Nabitz, Fraunhofer Institute of Systems and Innovation Research
Clemens Rohde, Fraunhofer Institute of Systems and Innovation Research
Oliver Som, MCI Management Center

Quantifying the overall impact of additive manufacturing on energy demand: The case of selective laser-sintering processes for automotive and aircraft components (2-084-16)
Peer-reviewed paper
Tim Hettesheimer, Fraunhofer Institute for Systems and Innovation Research, Germany
Han Byeol Roß, Fraunhofer Institute for Systems and Innovation Research ISI, Germany
Simon Hirzel, Fraunhofer Institute for Systems and Innovation Research ISI, Germany

Only non-energy benefits when adopting an EEM? Cases from industry (2-086-16)
Peer-reviewed paper
Enrico Cagno, Politecnico di Milano - Dept. Management, Economics and Industrial Engineering, Italy
Andrea Trianni, Politecnico di Milano, Dept. Management, Economics and Industrial Engineering, Italy
Davide Moschetta, Politecnico di Milano, Dept. Management, Economics and Industrial Engineering, Italy

Barriers to, drivers for and non-energy benefits for industrial energy efficiency improvement measures in compressed air systems (2-094-16)
Peer-reviewed paper
Ricardo Parra H, Crowsnest, Germany
Therese Nehler, Linköping university, IEI/Department of Management and Engineering, The division of Energy Systems, Sweden
Patrik Thollander, Department of Management and Engineering (IEI) Division of Energy Systems, Linköping University, Sweden

How companies respond to the emergence of 3D printing technology (2-104-16)
Peer-reviewed paper
Wen Liu, University of Cambridge, United Kingdom
Steve Evans, University of Cambridge, United Kingdom

Paying the full price! Efficient pricing of CO2 abatement along the supply chain for basic materials (2-137-16)
This is a non-peer reviewed extended abstract. No paper available.
Johan Rootzen, Energy Technology, Department of Energy and Environment, Chalmers University of Technology, Sweden
Filip Johnsson, Department of Energy and Environment, Energy Technology, Chalmers University of Technology, Sweden

Circular economy isn’t so easy – but it can be done! (2-129-16)
This is a non-peer reviewed extended abstract. No paper available.
Per Sommarin, Swerea SWECAST, Sweden
Martin Wänerholm, Swerea SWECAST, Sweden

Platform Climate Protection and Industry North-Rhine Westphalia – a multi stakeholder process for the advancement of energy efficiency and low-carbon technologies in energy intensive industries (2-144-16)
Peer-reviewed paper
Valentin Espert, Wuppertal Institut for Climate Environment and Energy, Germany
Stefan Lechtenböhmer, Wuppertal Institut für Klima, Umwelt, Energie, Germany
Clemens Schneider, Wuppertal Institut für Klima, Umwelt, Energie, Germany
Daniel Vallentin, Wuppertal Institut für Klima, Umwelt, Energie, Germany
Karin Arnold, Wuppertal Institut für Klima, Umwelt, Energie, Germany

Worldwide resource efficient steel production (2-151-16)
Peer-reviewed paper
Maria Xylia, KTH Royal Institute of Technology, Sweden
Semida Silveira, KTH Royal Institute of Technology, Sweden
Jan Duerinck, VITO – Flemish Institute for Technological Research, Belgium
Frank Meinke-Hubeny, VITO – Flemish Institute for Technological Research, Belgium

Life cycle energy labels for products (2-162-16)
This is a non-peer reviewed extended abstract. No paper available.
Martin Reisinger, Institute for Energy Efficiency in Production; University of Stuttgart, Germany

Panels of the Industrial Efficiency 2016:

Panel 1. Policies and programmes

Panel 2. Sustainable production design and supply chain initiatives

Panel 3. Energy management: the nuts and bolts

Panel 4. Technology, products and systems

Panel 5. Business models and financing: established practice and innovative approaches

Industrial Efficiency 2016 start page

Industrial Efficiency 2016 partners