eceee  

Panel 4. Technology, products and systems

Panel leaders: Paula Fonseca & Sotirios Karellas

Introduction to Panel 4

Energy saving options for industrial furnaces – the example of the glass industry (4-030-16)
Peer-reviewed paper
Clemens Frassine, Technische Universität Darmstadt, Germany
Clemens Rohde, Fraunhofer Institute for Systems and Innovation Research, Germany
Simon Hirzel, Fraunhofer Institute for Systems and Innovation Research, Germany

Energy efficiency with easy advanced control on screw and reciprocating compressors for poultry refrigeration (4-011-16)
Peer-reviewed paper
Benedicte Ballot-Miguet, Electricity of France, France
Gregoire DUHOT, Electricity of France, France
Alain REYNAUD, LDC

Biogas production feasibility in food industry clusters (4-023-16)
Peer-reviewed paper
Emma Lindkvist, Linköping University, Sweden
Magnus Karlsson, Linköping University, Sweden
Jenny Ivner, Linköping University, Sweden

Dual-Media High Temperature Thermal Storage for Industrial Waste Heat Recovery (4-042-16)
This is a non-peer reviewed extended abstract. No paper available.
Richard Gurtner, ZAE Bayern, Germany

From component efficiency to system efficiency in variable speed motor drives (4-056-16)
This is a non-peer reviewed extended abstract. No paper available.
Norbert Hanigovszki, Danfoss Drives A/S, Denmark
Aksel Jepsen, Danfoss Drives A/S, Denmark

Model-based quantification of the contribution of industrial heat pumps to the European climate change mitigation strategy (4-061-16)
Peer-reviewed paper
Stefan Wolf, Institute for Energy Economics and the Rational Use of Energy, University of Stuttgart, Germany
Markus Blesl, Institute for energy economy and the rational use of energy (IER) - University of Stuttgart, Germany

Estimation of energy efficiency improvement opportunities for the cement industry in Taiwan (4-064-16)
This is a non-peer reviewed extended abstract. No paper available.
Yun-Hsun Huang, Industrial Technology Research Institute (ITRI), Taiwan
Yi-Lin Chang, Industrial Technology Research Institute, Taiwan
Tobias Fleiter, Fraunhofer Institute for Systems and Innovation Research, Germany

Steel and food industries in Italy: analysis of the energy efficiency potential (4-070-16)
Peer-reviewed paper
Francesca Bazzocchi, RSE spa, Italy
Claudio Zagano, RSE, Italy
Elena Gobbi, RSE, Italy

Investigating operability issues of heat integration for implementation in the oil refining industry (4-074-16)
Peer-reviewed paper
Sofie Marton, Chalmers University of Technology, Sweden
Elin Svensson, Chalmers University of Technology, Sweden
Simon Harvey, Chalmers University of Technology, Sweden

How to decarbonise energy-intensive processing industries? Survey and conceptualisation of their specific innovation systems (4-088-16)
Peer-reviewed paper
Joeri Wesseling, Centre for Innovation, Research and Competence in the Learning Economy (CIRCLE) Lund University, Sweden
Lars Coenen, Centre for Innovation, Research and Competence in the Learning Economy (CIRCLE) Lund University, Sweden
Lars J. Nilsson, Department of Environmental and Energy Systems Studies Lund University, Sweden
Stefan Lechtenböhmer, Wuppertal Institute for Climate Environment and Energy, Germany
Ernst Worrell, Copernicus Institute of Sustainable Development Utrecht University, The Netherlands
Max Åhman, Department of Environmental and Energy Systems Studies Lund University, Sweden

Extending building simulation software to include the organic Rankine cycle for factory waste heat recovery (4-096-16)
Peer-reviewed paper
Richard Greenough, Institute of Energy and Sustainable Development, United Kingdom
Ivan Korolija, Institute of Energy and Sustainable Development, De Montfort University, United Kingdom
Michael Oates, Integrated Environmental Solutions Limited., United Kingdom

Bottom-up analysis of energy efficiency improvement in motor systems and heat recovery opportunities in Swiss industry (4-099-16)
This is a non-peer reviewed extended abstract. No paper available.
M. Jibran S. Zuberi, University of Geneva, Institute for Environmental Sciences and Forel Institute, Switzerland
Rishabh Saxena, Lucerne School of Engineering and Architecture, Lucerne University of Applied Sciences and Arts, Switzerland
Martin Patel, Chair for Energy Efficiency, Institute for Environmental Sciences and Forel Institute, University of Geneva, Switzerland
Sabine Sulzer, Lucerne School of Engineering and Architecture, Lucerne University of Applied Sciences and Arts, Switzerland
Marina Santoro, Lucerne School of Engineering and Architecture, Lucerne University of Applied Sciences and Arts, Switzerland
Beat Wellig, Lucerne School of Engineering and Architecture, Lucerne University of Applied Sciences and Arts, Switzerland

Energy saving incentives for the European glass industry in the frame of the EU emissions trading scheme (4-102-16)
Peer-reviewed paper
Christina-Stavrula Hatzilau, Greece
Sotirios Karellas, National Technical University of Athens, Greece
Ioannis Dolianitis, Centre for Research & Technology Hellas, Greece
Dionysios Giannakopoulos, Centre for Research & Technology Hellas, Greece
Georgios Skarpetis, Drujba Glassworks, Bulgaria
Theodoros Zitounis, Drujba Glassworks, Bulgaria

Industrial excess heat exploitation in energy intensive industries (4-106-16)
Peer-reviewed paper
Daniele Forni, FIRE – Italian Federation for Rational Use of Energy, Italy
Riccardo Vescovo, Turboden, Italy
Dario Di Santo, FIRE - Federazione Italiana per l'uso Razionale dell'Energia, Italy
Marco Baresi, Turboden, Italy

IIoT based efficiency monitoring of a pick & place robot (4-114-16)
Peer-reviewed paper
Stefano Farné, Università degli Studi di Pavia, Italy
Ezio Bassi, University of Pavia, Italy
Francesco Benzi, Department of Electrical, Computer and Biomedical Engineering, Italy
Francesco Compagnoni, University of Pavia, Italy

Techno-economic demand response potentials of the integrated steelmaking site of Tata Steel in IJmuiden (4-126-16)
Peer-reviewed paper
Arzu Feta, Tata Steel Europe, The Netherlands
Machteld van den Broek, Copernicus Institute, Utrecht University, The Netherlands
Wina Crijns-Graus, Copernicus Institute, Utrecht University, The Netherlands
Gerard Jägers, Tata Steel, IJmuiden, The Netherlands

Hardware in the loop evaluation of a hybrid heating system for increased energy efficiency and management (4-132-16)
Peer-reviewed paper
Gregor Schumm, University of Kassel - Department of sustainable products and processes, Germany
Matthias Philipp, Universität Kassel, Germany
Florian Schlosser, Universität Kassel, Germany
Jens Hesselbach, Universität Kassel, Germany
T.G. Walmsley, Energy Research Centre, School of Engineering, University of Waikato, New Zealand
M.J. Atkins, Energy Research Centre, School of Engineering, University of Waikato, New Zealand

Industrial site energy integration – the sleeping giant of energy efficiency? Identifying site specific potentials for vertical integrated production at the example of German steel production (4-134-16)
Peer-reviewed paper
Clemens Schneider, Wuppertal Institute for Climate, Environment & Energy, Germany
Stefan Lechtenböhmer, Wuppertal Institute for Climate, Environment and Energy, Germany

Increased energy and resource efficiency for air conditioner and heat pump system using R32 as refrigerant (4-145-16)
This is a non-peer reviewed extended abstract. No paper available.
Volker Weinmann, DAIKIN Airconditioning Germany GmbH, Germany

A prototype tool for automatically giving energy saving advice based on smart meter data (4-156-16)
Peer-reviewed paper
Osamu Kimura, Central Research Institute of Electric Power Industry, Japan
Hidenori Komatsu, Central Research Institute of Electric Power Industry, Japan
Ken-ichiro Nishio, Central Research Institute of Electric Power Industry, Japan
Toshihiro Mukai, Central Research Institute of Electric Power Industry, Japan

Flue gas condensation – one option to maximise cycle efficiency of renewable and fossil fuel fired power plants (4-170-16)
This is a non-peer reviewed extended abstract. No paper available.
Jürgen Peterseim, ERK Eckrohrkessel GmbH, Germany
Atul Sharma, ERK Eckrohrkessel GmbH, Germany
Dipl.Ing. Nikolai Sachno, La Mont GmbH, Germany

Oxygen enrichment of air combustion for natural gas furnaces in steel mills (4-171-16)
This is a non-peer reviewed extended abstract. No paper available.
Patricio Aguirre, Tecnalia Research and Innovation, Spain
Luis María Lakunza, ArcelorMittal Gipuzkoa
Patrick Bárcia, Sysadvance
Beatriz Sanchez, Tecnalia

Panels of the eceee Industrial Summer Study proceedings – Industrial Efficiency 2016:

Panel 1. Policies and programmes

Panel 2. Sustainable production design and supply chain initiatives

Panel 3. Energy management: the nuts and bolts

Panel 4. Technology, products and systems

Panel 5. Business models and financing: established practice and innovative approaches

eceee Industrial Summer Study proceedings – Industrial Efficiency 2016 start page

Industrial Efficiency 2016 partners